| Like this CertiGuide? Get it in PDF format! |
Click Here!
Use coupon code "SAVE50" to get it half price! |
|
|
Baby AT Form Factor
By about 1997 electronics had shrunk
in both size and heat output so the original AT form factor was no longer
needed. Anytime a manufacturer can use fewer raw materials, they do
so, to reduce costs. The newer smaller form factor
was called the Baby AT form factor. The footprint of the Baby
AT is usually about 8.5" x 13". This is a bit smaller than the original
12" x 13" AT form factor.
| If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to A+ (Core Hardware) from StudyExam4Less.com. (Use coupon code "SAVE50" to save a full 50% off the already low price!) Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
CertiGuide to A+ (Core Hardware) (http://www.CertiGuide.com/aplush/) on CertiGuide.com
Version 1.0 - Version Date: December 6, 2004
Adapted with permission from a work created by Tcat Houser.
CertiGuide.com Version © Copyright 2004 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|
