CertiGuide to A+ (A+ 4 Real) - Webmin Configuration

Although Webmin usually needs no additional customization to work correctly, the system administrator might want to limit from where this tool can be accessed and whether remote administration will be allowed, for obvious security reasons. This can be done by clicking on the Webmin configuration button as seen in Figure 364, which shows the various configuration menus. IP access control (Figure 365) can be used to restrict the IP addresses from which Webmin can be accessed. Entering the localhost (loopback) address will limit access to Webmin from the browser on the machine to be administered. This is very important if the system is on a public network to avoid a remote compromise of the system.

**Figure 365: IP Access Control**

Webmin Install and Login

Webmin System Configuration Tools

If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to A+ (A+ 4 Real) from StudyExam4Less.com. Thanks for your support!

Home - Table Of Contents - Contact Us

CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com
Version 1.0 - Version Date: March 29, 2005

Adapted with permission from a work created by Tcat Houser et al.
CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.