| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ultra2 SCSI Ultra2 SCSI provides a solution to the cable length and device attachment limits through Low Voltage Differential signaling100. It increases the transfer rate while retaining compatibility with older non-Ultra2 (single-ended) devices. Ultra2 LVD configurations allow up to12.5 meters of bus length and allow the attachment of up to 15 devices. In order to operate in LVD mode, all devices attached to the bus must be LVD devices. Otherwise, the protocol automatically defaults to the single-ended Ultra SCSI mode. __________________ 100. http://www.iec.org/online/tutorials/low_voltage/
Home - Table Of Contents - Contact Us CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com Version 1.0 - Version Date: March 29, 2005 Adapted with permission from a work created by Tcat Houser et al. CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved. Not responsible for any loss resulting from the use of this site. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||