CertiGuide to A+ (A+ 4 Real)

The sc⁶⁷ command retrieves and sets information about services. Typing either sc or “sc /?” will result in the sc help page although the “/?” option will also produced an “unrecognized command” message. You are not immediately returned to the command prompt but instead, you are asked if you want help with the QUERY or QUERYEX commands. You answer either yes or no and afterwards you are returned to the command prompt.

With this command you can start, stop, pause or query services. For example, to query dhcp services, type sc query dhcp. An example of the result is in Figure 298.

**Figure 298: DHCP Services Query Response**

__________________

67. http://snipurl.com/Service_Controller

Relog

SchTasks

If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to A+ (A+ 4 Real) from StudyExam4Less.com. Thanks for your support!

Home - Table Of Contents - Contact Us

CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com
Version 1.0 - Version Date: March 29, 2005

Adapted with permission from a work created by Tcat Houser et al.
CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.