| Read this whole guide offline with no ads, for a very low price! |
Click Here!
|
|
|
Multimode Termination
Multimode termination allows the
attachment of LVD and non-LVD devices to the same SCSI bus and provides
the correct termination for both types of signaling. A multimode terminator
uses the DIFFSEN line to determine what the type of device is attached
to and terminates the signal accordingly. A multimode terminator acts
like an intelligent active terminator because it is able to distinguish
whether all devices are LVD, all single-ended, or a mix of different
types.
| If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to A+ (A+ 4 Real) from StudyExam4Less.com. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com
Version 1.0 - Version Date: March 29, 2005
Adapted with permission from a work created by Tcat Houser et al.
CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|
