| Like this CertiGuide? Get it in PDF format! |
Click Here!
|
|
|
Ethernet Configuration
For Ethernet, you simply select the
TCP/IP tab and then from the Configure menu, select Manually, Manually
using DHCP router, using DHCP, or using BOOTP.
Figure 386: Network Setup for Ethernet

|
If you choose a manual
setting, you will be prompted to input your IP address, your Subnet
Mask and your Routers IP.
| If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to A+ (A+ 4 Real) from StudyExam4Less.com. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com
Version 1.0 - Version Date: March 29, 2005
Adapted with permission from a work created by Tcat Houser et al.
CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|